Technical Information
| Properties | Parameter | reflective 85 | MIRO reflective 90 | MIRO high reflective 95 | Norm |
| Mechanical | Tensile Strength (Mpa): Yield Strength (Mpa): Elongation A 50%: Bending radius: |
160 - 200 140 - 180 ≥ 2 ≥ 1.5 fold thickness |
160 - 200 140 - 180 ≥ 2 ≥ 1.5 fold thickness |
160 - 200 140 - 180 ≥ 2 ≥ 1.5 fold thickness |
EN 485-2 EN 485-2 EN 485-2 |
| Optical | Total solar reflectance %: Total light reflectance %: Specular reflectance %: Front side: Reverse side: |
85 86 80 / 76 along/across anodised anodised |
90 95 91/ 90 along/across PVD - improved anodised |
95 98 93/ 92 along/across PVD - improved anodised |
ASTM 891-87 ISO 7668 60° DIN 5036-3 |
| Physical | Density, g/cm3: Coefficient of heat expansion (10-6/K-1): Heat resistance: |
2.7 23.5 250°C |
2.7 23.5 250°C |
2.7 23.5 180°C |
|
| Dimensions | Width in mm (inch): Thickness in mm (inch): |
max. 1250 (49.21) 0.3-0.8 (.012 - .031) |
max. 1250 (49.21) 0.3-0.8 (.012 - .031) |
max. 1250 (49.21) 0.2-0.5 (.008 - .020) |
|
| Delivery | Coils or sheets with: Innerdiameter 400 or 500 mm: |
protective film  |
protective film |
protective film |
* |
| Corrosion and Weather Resistance |
Fit for Outdoor use: Salt spray test: Δ T-Test: 500 h QUV-B-Test: 24 h boiling test: |
||||
| Warranty | 10 years: | ||||
* = Products with protective film are guaranteed for 6 month after date of delivery if they are stored in a conditioned room (temperature 20-30°C and relative humidity 50-60°C) and kept away from sunlight and any heating source. Protective film is not UV resistant.
| Properties | Parameter | weatherproof 85 | MIRO-SUN weatherproof reflective 90 | MIRO-SUN PV weatherproof reflective 90 | Norm |
| Mechanical | Tensile Strength (Mpa): Yield Strength (Mpa): Elongation A 50%: Bending radius: |
130 - 160 125 - 155 ≥ 2 ≥ 2 fold thickness |
130 - 160 125 - 155 ≥ 2 ≥ 2 fold thickness |
130 - 160 125 - 155 ≥ 2 ≥ 2 fold thickness |
EN 485-2 EN 485-2 EN 485-2 |
| Optical | Total solar reflectance %: Solar weighted specular reflectance (Rs solar) %: Total light reflectance %: Specular reflectance %: Front side: Reverse side: Backside lacquered: |
85 - 85 75 - 85 / 70 - 80 along/across anodised & protected anodised possible |
90 86.8 ≤ Rs solar ≤ 88.3 92 87 / 87 along/across PVD & protected anodised possible |
90 - 87 86 / 86 along/across PVD & protected anodised possible |
ASTM 891-87 Test Report DLR KTr 3001588 DIN 5036-3 ISO 7668 60° |
| Physical | Density, g/cm3: Coefficient of heat expansion (10-6/K-1): Heat resistance: |
2.7 23.5 200°C |
2.7 23.5 200°C |
2.7 23.5 200°C |
|
| Dimensions | Width in mm (inch): Thickness in mm (inch): |
max. 1250 (49.21) 0.3-0.8 (.012 - 031) |
max. 1250 (49.21) 0.3-0.8 (.012 - 031) |
max. 1250 (49.21) 0.3-0.8 (.012 - 031) |
|
| Delivery | Coils or sheets with: Innerdiameter 400 or 500 mm: |
protective film |
protective film |
protective film |
* |
| Corrosion and Weather Resistance |
Fit for Outdoor use: Salt spray test: Δ T-Test: 500 h QUV-B-Test: 24 h boiling test: |
|
|
|
DIN EN ISO 9227 DIN 50 928, chapt. 9.5 DIN EN ISO 4892-3 GSB-guideline |
| Warranty | 10 years: | |
|
|
|
* = Products with protective film are guaranteed for 6 month after date of delivery if they are stored in a conditioned room (temperature 20-30°C and relative humidity 50-60°C) and kept away from sunlight and any heating source. Protective film is not UV resistant.
